Betekenis van:
current unit

Voorbeeldzinnen

1. Current density (J) is defined as the current flowing through a unit cross section perpendicular to its direction in a volume conductor such as the human body or part of it, expressed in amperes per square metre (A/m2).
2. The quality of current collection depends on the number of pantographs in service, their spacing and other traction-unit-specific details.
3. how should the requirement ‘… stated in terms of the measuring unit current at the balance sheet date’ in paragraph 8 of IAS 29 be interpreted when an entity applies the Standard?
4. With the financial sector accounting for more than one quarter of GDP, the current financial crisis could deeply affect the country. In addition, the comparatively rapid increase in unit-labour costs is likely to negatively affect competitiveness.
5. Switch unit for coaxial cable, comprising 3 electromagnetic switches, with a switching time of not more than 50 ms and an actuating current of not more than 500 mA at a voltage of 12 V
6. For the preparation of the train, the RU must have access to the infrastructure restriction notices, to the technical wagon data (Rolling Stock Reference Databases, Chapter 4.2.11.3: The Rolling Stock Reference Databases), to the dangerous goods reference file and to the current, updated information status on the wagons (Chapter 4.2.12.2: Other databases : The Wagon and Intermodal Unit Operational Database).
7. Services paid for during the reference period are also included regardless of whether they are industrial or non-industrial. In this figure are payments for all work carried out by third parties on behalf of the unit including current repairs and maintenance, installation work and technical studies.
8. issuing an equal number of replacement allowances by converting AAUs issued for the current period held in the Party holding account into allowances by adding the allowance element to the unique unit identification code of each such AAU comprising the elements set out in Annex VI;
9. For the preparation of the train, the RU must have access to the infrastructure restriction notices, to the technical wagon data (Rolling Stock Reference Databases, Chapter 4.2.11.3: The Rolling Stock Reference Databases), to the dangerous goods reference file and to the current, updated information status on the wagons (Chapter 4.2.12.2: Other databases : The Wagon and Intermodal Unit Operational Database). This applies to all wagons on the train.
10. The product covered by the current review is the same as in the original investigation, i.e. electronic weighing scales for use in the retail trade, having a maximum weighing capacity not exceeding 30 kg, which incorporate a digital display of the weight, unit price and price to be paid (whether or not including a means of printing this data), normally declared within CN code ex84238150 (TARIC code 8423815010) and originating in Taiwan.
11. Lower external demand, lower tourism revenues, considerably higher oil and commodity prices and nominal wage increases have affected the competitiveness of the Cypriot economy and have widened the current account deficit to over 13 % of GDP in 2008. It is expected to narrow to 12 % in 2009. There is a need to regain competitiveness through measures enhancing productivity growth and adequate unit labour cost developments.
12. "Composite" (1 2 6 8 9) means a "matrix" and an additional phase or additional phases consisting of particles, whiskers, fibres or any combination thereof, present for a specific purpose or purposes. "Compound rotary table" (2) means a table allowing the workpiece to rotate and tilt about two non-parallel axes, which can be coordinated simultaneously for "contouring control". "Computing element" ("CE") (4) means the smallest computational unit that produces an arithmetic or logic result. "III/V compounds" (3) means polycrystalline or binary or complex monocrystalline products consisting of elements of groups IIIA and VA of Mendeleyev's periodic classification table (e.g. gallium arsenide, gallium-aluminium arsenide, indium phosphide). "Contouring control" (2) means two or more "numerically controlled" motions operating in accordance with instructions that specify the next required position and the required feed rates to that position. These feed rates are varied in relation to each other so that a desired contour is generated (ref. ISO/DIS 2806-1980). "Critical temperature" (1 3 6) (sometimes referred to as the transition temperature) of a specific "superconductive" material means the temperature at which the material loses all resistance to the flow of direct electrical current. "Cryptography" (5) means the discipline which embodies principles, means and methods for the transformation of data in order to hide its information content, prevent its undetected modification or prevent its unauthorised use. "Cryptography" is limited to the transformation of information using one or more "secret parameters" (e.g., crypto variables) or associated key management. N.B.:"secret parameter": a constant or key kept from the knowledge of others or shared only within a group.
13. "Tilting spindle" (2) means a tool-holding spindle which alters, during the machining process, the angular position of its centre line with respect to any other axis. "Time constant" (6) is the time taken from the application of a light stimulus for the current increment to reach a value of 1-1/e times the final value (i.e. 63 % of the final value). "Total control of flight" (7) means an automated control of "aircraft" state variables and flight path to meet mission objectives responding to real time changes in data regarding objectives, hazards or other "aircraft". "Total digital transfer rate" (5) means the number of bits, including line coding, overhead and so forth per unit time passing between corresponding equipment in a digital transmission system. N.B.:See also "digital transfer rate". "Tow" (1) is a bundle of "monofilaments", usually approximately parallel. "Toxins" (1 2) means toxins in the form of deliberately isolated preparations or mixtures, no matter how produced, other than toxins present as contaminants of other materials such as pathological specimens, crops, foodstuffs or seed stocks of "microorganisms". "Transfer laser" (6) means a "laser" in which the lasing species is excited through the transfer of energy by collision of a non-lasing atom or molecule with a lasing atom or molecule species. "Tunable" (6) means the ability of a "laser" to produce a continuous output at all wavelengths over a range of several "laser" transitions. A line selectable "laser" produces discrete wavelengths within one "laser" transition and is not considered "tunable". "Unmanned Aerial Vehicle" ("UAV") (9) means any aircraft capable of initiating flight and sustaining controlled flight and navigation without any human presence on board.
14. "Systolic array computer" (4) means a computer where the flow and modification of the data is dynamically controllable at the logic gate level by the user. "Tape" (1) is a material constructed of interlaced or unidirectional "monofilaments", ’strands’, "rovings", "tows", or "yarns", etc., usually preimpregnated with resin. N.B.:’Strand’ is a bundle of "monofilaments" (typically over 200) arranged approximately parallel. "Technology" (GTN NTN All) means specific information necessary for the "development", "production" or "use" of goods. This information takes the form of ’technical data’ or ’technical assistance’. N.B.: 1:’Technical assistance’ may take forms such as instructions, skills, training, working knowledge and consulting services and may involve the transfer of ’technical data’. N.B. 2:’Technical data’ may take forms such as blueprints, plans, diagrams, models, formulae, tables, engineering designs and specifications, manuals and instructions written or recorded on other media or devices such as disk, tape, read-only memories. "Tilting spindle" (2) means a tool-holding spindle which alters, during the machining process, the angular position of its centre line with respect to any other axis. "Time constant" (6) is the time taken from the application of a light stimulus for the current increment to reach a value of 1-1/e times the final value (i.e., 63 % of the final value). "Total control of flight" (7) means an automated control of "aircraft" state variables and flight path to meet mission objectives responding to real time changes in data regarding objectives, hazards or other "aircraft". "Total digital transfer rate" (5) means the number of bits, including line coding, overhead and so forth per unit time passing between corresponding equipment in a digital transmission system. N.B.:See also "digital transfer rate". "Tow" (1) is a bundle of "monofilaments", usually approximately parallel.
15. "Common channel signalling" (5) is a signalling method in which a single channel between exchanges conveys, by means of labelled messages, signalling information relating to a multiplicity of circuits or calls and other information such as that used for network management. "Communications channel controller" (4) means the physical interface which controls the flow of synchronous or asynchronous digital information. It is an assembly that can be integrated into computer or telecommunications equipment to provide communications access. "Composite" (1 2 6 8 9) means a "matrix" and an additional phase or additional phases consisting of particles, whiskers, fibres or any combination thereof, present for a specific purpose or purposes. "Composite theoretical performance" ("CTP") (3 4) is a measure of computational performance given in millions of theoretical operations per second (Mtops), calculated using the aggregation of "computing elements" ("CE"). N.B.: See Category 4, Technical Note. "Compound rotary table" (2) means a table allowing the workpiece to rotate and tilt about two non-parallel axes, which can be coordinated simultaneously for "contouring control". "Computing element" ("CE") (4) means the smallest computational unit that produces an arithmetic or logic result. "Contouring control" (2) means two or more "numerically controlled" motions operating in accordance with instructions that specify the next required position and the required feed rates to that position. These feed rates are varied in relation to each other so that a desired contour is generated (ref. ISO/DIS 2806 - 1980). "Critical temperature" (1 3 6) (sometimes referred to as the transition temperature) of a specific "superconductive" material means the temperature at which the material loses all resistance to the flow of direct electrical current.